Designed to fit the mid level leg joint casting of the 515MVB and 525MVB tripods to provide additional rigidity and structural support. The spreader braces are telescopic.

Built to fit the mid level leg joint casting to provide additional rigidity and structural support, this innovative spreader is called the "SQUID" because of its peculiar design. Unlike most spreaders, it lets you fine tune the spreader brace angle to perfectly suit your working position. In combination with this continuous angle adjustment, you can use the quick click-stop arm length presets for rapid, precise operation. Technology used on this product is pat-pending.

Set of 3. For tripod: 350SHMVB, 350MVB,351MVB, 351MVCF, 515MVB, 525MVB

The shortest arm at 13 cm is also the most powerful. The pivoting pin is threaded with 1/4 and 3/8 studs so it can be attached to the top of a video camera to support a small monitor or other video accessory with an exceptional load of 3,5 Kg.

This arm spans 18 cm and can support up to 2,2 Kg. The 819 is the ideal companion for attaching a video monitor to a camera or using as a fl ag support. Like the 814, the pivoting pins are 1/4-20” and 3/8” threaded with one side offering a platform to provide a larger footprint for the equipment being supported by the arm.

This is the first arm that features 5/8 and 1/4 pins to support larger and heavier items. One of the two pins is hex shaped to marry perfectly with the Manfrotto 635 / 035 superclamps. With a total length of 23,5 cm, the 823 is ideal to position lighting fixtures or cameras virtually anywhere.

Panhandle controls puts the essential functions of your video camera within easy reach. Pan, Tilt, Zoom and focus all at once with one hand!

Clamp on to almost any tripod with round, square or flat pan handles. Puts the essential functions of your video camera within easy reach. Pan, Tilt, Zoom and focus all at once with one hand!

Waterproof cover for Manfrotto remote control series 522, 523 and 524 - supplied with a crystal clear non-clouding vinyl panel to allow to view the remote control button during the shooting session. The cover slips quickly over the remote pan bar to protect it from rain or sudden showers.

After years of using the Fig Rig on his award-winning films, Mike Figgis brought his idea to Manfrotto. An idea that is non-traditional in design, but purely simple and effective. The only modular system in the world to smoothly support the DV camera and act as a frame to mount all the accessories – including zoom controllers, mics, mixers, lights, monitors, arms... With the use of the optional 595CLA you can convert the Fig Rig frame into a fully-loaded roving cine rig precisely positioning your mic or monitor anywhere around your camera. Add on a Manfrotto 521 series remote control and now you have complete fingertip control of zoom and focus. Customize the Fig Rig to your liking. Manfrotto provides the canvas to allow you to create your masterpiece.

Clamp specifically designed for the Fig Rig ot allow accessories like hard drives, lights and microphones to be attached.

The 521SB allows you to plug in two 521 series remotes to control the camera with both hands. For example, plug two 521PRO remotes into the 521SB and use the zoom wheel of one 521PRO to control zoom and the other to control focus. The 521SB is threaded with a 3/8 and 1/4 socket and supplied with a thumbscrew to mount directly to the Fig Rig crossbar. Check with your dealer for remote control compatibility.

Single lever braking system controls all three 80mm wheels.

Heavy duty, super sturdy dollies are designed for use with large still and video tripods.

Same as 114 Dolly with ability to accept spiked tip tripods.

Designed for light and medium weight tripods.