| Home | Rentals | Sales | Contacts | Knowledgebase | Information | Print version |
| Sales |
|
||
| MANFROTTO VIDEO HEADS, LEGS & KITS | ||
| There many combinations of Manfrotto video support products available. Bring your camera and compare for yourself the different features and feel of each head and leg combination. | ||
|
||
| Manfrotto Video Heads | ||
NZ Distributor
|
||
| Print Product List | ||
 |
 |
Manfrotto 526 Professional Fluid Video Head Counterbalance is achieved through an adjustable spring for camera weights between 8 and 15kg. The 526 offers our most precise fluid drag system comprised of three step settings for low, medium and high drag levels (numbered 1, 2 and 3), plus the additional no-drag setting (number 0) for such occasions as snap-pans/tilts. The built-in 100mm half-ball adapts to a number of our tripods with a 100mm receiver, allowing the quick levelling of the camera. Large rubber padded knobs for better grip and all the controls. Tilt and pan lock and the tilt drag are located on the left side so they can be easily found. Levelling bubble. Max Load Capacity: 16kg 1 - Tilt Locking Knob2 - Pan Locking Knob 3 - Tilt Drag Knob 4 - Spirit Level 5 - Pan Drag Control 6 - Sliding Plate Safety Release Button 7 - Sliding Quick Release Plate 8 - Sliding Quick Release Knob 9 - Interchangeable Pan Bar Rosette 10 - Counterbalance Adjustment Knob |
 |
|
Manfrotto 519 Professional Fluid Video Head The Manfrotto 519 has been developed as a compact, yet heavy duty fluid video head capable of accommodating a counterbalance payload from 1,5kg up to 9kg. The only video head on the market encompassing both interchangeable and adjustable counter-balance springs a feature that will allow Videographers to easily interchange a vast array of cameras of various weights as well as quickly fine tune the perfect balance point of whatever camera being used, all with just one head! In addition, fluid drag is easily controlled with a large clickstop numbered knob in seven increments. Drag can be adjusted from the highest possible setting to nearly zero drag, allowing for the finest control through 360° pan and +90° to -90° tilt. 75mm bowl fitting. |
 |
|
Manfrotto 516 Professional Video Head High performance head equipped with fluid cartridges that provide continuous adjustable drag control. Wide range of friction control down to zero drag and operates on both pan and tilt axis. Separate tilt and pan locking mechanism. A fixed counter balance spring of 7,5kg load capacity at a center of gravity of 125mm. Bubble level. Max Load Capacity: 10kg |
 |
|
 Manfrotto 503HDV Professional Video Head The Manfrotto 503HDV is a logical progression from the popular 503 model it replaces. Advanced features include: 4-step adjustable Counterbalance System Tilt friction and lock off knobs are all situated on the left side Illuminated levelling bubble for easy low light set-up Designed to support the latest professional digital video cameras. Fluid control for the smoothest possible pan and tilt movements. Customisable performance using a manually adjustable drag variation mechanism, which offers continuous adjustment from nearly 0 drag to maximum. Telescopic pan handle supports left or right operation. Quick release plate with safety latch. Maximum load capacity: 8Kg |
 |
|
Manfrotto 501HDV Fluid Video Head The new 501HDV includes a wide range of powerful features taking inspiration from the top professional video heads in the Manfrotto range. Features including a fixed counterbalance spring, that helps ensure a smother tilt movement, with an easy to reach on/off switch for different filming setups. From the ouside, Manfrotto has developed a new innovative, functional and ergonomic design, with locks and knobs that allow a more solid grip and better fingertip control. Total control, for professional performance. Designed to support the latest range of small, professional digital cameras as well as cameras with longer lenses and spotting scopes. 1 - Pan friction control. 2 - Spring loaded counterbalance control. 3 - Pan lock. 4 - Tilt friction balance knob. 5 - Tilt lock. 6 - Quick release plate safety button. 7 - Sliding quick release plate. 8 - Spirit level |
 |
|
Manfrotto 701RC2 Mini Video Head Ideal for set-ups such as a fully equipped 3 CCD mini DV camcorders or spotting scopes. The 701RC2 is one of the most compact and lightweight two way heads found on the market. Fixed 1.5 kg counterbalance spring, combined with a sliding camera plate attachment, offering shift from +15mm to -15mm from 0 point to deliver a wide range of balancing positions. Fixed length pan bar with a soft handle. Separate locking mechanisms. Max Load Capacity: 4kg |
 |
|
Manfrotto 128RC head TMicro video head is perfect for lightweight consumer video cameras. Smooth movements on both pan and tilt. Pan and tilt locks. Adjustable pan bar can be positioned either on the left or right side.Quick release plate. Maximum load capacity: 4Kg |
 |
|
Manfrotto 128LP Head Micro video head is perfect for lightweight consumer video cameras. Smooth movements on both pan and tilt. Pan and tilt locks. Adjustable pan bar can be positioned either on the left or right side.Maximum load capacity: 4Kg |
|
||
| Manfrotto Video Tripod Kits | ||
|
NZ Distributor
|
||
| Print Product List | ||
 |
|
Manfrotto 700RC2.190XBK closed length 63.1 cm minimum height 17.6 cm maximum height 155.6 cm maximum height (with center column down) 128.1 cm weight 2.3200 kg load capacity 2.5 kg |
 |
|
Manfrotto 701RC2.055CLB Kit Special Price, Limited stock, includes a padded carry bag. closed length 73,6 cm minimum height 51,6 cm maximum height 175 cm maximum height (with center column down) 150,6 cm weight 3.30 kg load capacity 4.00 kg |
 |
|
Manfrotto 701RC2.755XBK tripod kit closed length 73,6 cm minimum height 51,6 cm maximum height 175 cm maximum height (with center column down) 150,6 cm weight 3.30 kg load capacity 4.00 kg |
 |
|
Manfrotto 503HDV.525 Tripod kit Complete Tripod And Head Kit. Comprising: 503HDV Pro fluid video head (see details above) 525MVB two stage tripod- High tensile aluminum poles. - Die-cast aluminum crown - 75mm bowl - twin spiked feet Half bowl adaptor for quick set up and levelling of the head. Floor spreader for additional stability. Mid level spreader and rubber feet optional extras Padded carry bag features a large internal pocket to carry remotes and accessories. |
|
||
| Manfrotto Video Tripods | ||
|
NZ Distributor
|
||
| Print Product List | ||
 |
|
Manfrotto 755XB MDEVE Tripod Professionals will love this extremely compact and light aluminum video tripod. Perfectly supports most MINI DV camcorders. Max. load capacity: 7kg |
 |
|
Manfrotto 117B Video/Movie Professional Tripod Stainless steel extension legs and extra sturdy leg locks make this the robust choice for video crews around the world.,/p> Features built-in spirit level at the shoulder and telescopic mid level spreader. Comes complete with rubber feet and retractable metal spike. Max. load capacity: 18kg |
 |
|
Manfrotto 525MVB Professional Video Tripod A two stage, lightweight, high tensile aluminum tripod that is extremely rigid and stable. The 525MVB has a die-cast aluminum crown with a built-in 75mm interface bowl. Adjustable quick action leg clamp levers for reliability and safety in the field and a floor-level spreader which aids tripod leg angle setting adjustment. Lowest leg section has twin spiked metal feet. The tripod can also be equipped with spiked feet shoes and two models of mid level spreader. Suitable for use with Manfrotto Dollies. Supplied floor spreader 165MV. |
 |
|
Manfrotto Heavy Duty Video Tripod The 528XB is the ideal location tripod and is a perfect match for jib arma of all sizes. It is a sturdy single-stage tripod with a single-tube leg structure. Tubes are made of stainless steel for strength under heavy loads, and aluminium for weight saving. The leg spread is fully adjustable, but also incorporates a 30° locked position for faster set up and greater strength. A 100mm bowl accepts industry-standard half-ball video heads and allows you to level the head quickly for accurate panoramic shots. The included claw ball allows you to use it with heads not equipped with a half ball. The 528XB includes a versatile mid-level spreader, which has telescopic "ratchet" braces that click into place in each of the preset positions for faster deployment. Each brace can be individually set, allowing each tripod leg to be separately positioned. Max. load capacity: 50kg |
 |
|
Manfrotto 351MVB Tripod Designed with tandem upper legs and single lower legs with variable angle adjustment and twin spiked feet. Tripod is supplied with a 75 mm half bowl attachment. A built-in spreader is achieved with the two step (18° -28°) leg angle positioning system located at the top tripod spider. Legs can be adjusted within a 180° arc to other angle by using a mid level spreader 531SPRB and 530SPRB combined with a set of spike foot shoes 565 in case of unlevelled ground or by using a floor spreader code 165MV. Leg locks by a quick lever and stainless steel fittings make this product extremly versatile and easy to use. |
--- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---